Gas turbine flow meter General technical requirements
October 7, 2021
General technical requirements 1. Files The flowmeter should be accompanied by instructions for use. The flow meter that is calibrated...
Read More
Electromagentic flow meter Points to consider for environmental conditions
October 3, 2021
Explosive hazardous environment Generally, the instrument is used in an explosive environment, and an instrument that is suitable for the...
Read More
Installation location and flow direction
October 2, 2021
The installation direction of the sensor can be horizontal, vertical, or inclined without restriction. However, it is best to measure...
Read More
electromagnetic flowmeter liquid-solid two-phase fluid
October 1, 2021
The solid-liquid two-phase fluid containing non-ferromagnetic particles or fibers can also measure the volume flow of the two-phase. The solid...
Read More
Electromagnetic flow meter installation site
September 30, 2021
Installation site Generally, the protection level of the electromagnetic flow sensor housing is IP65 (dust and water spray level specified...
Read More
DN100 water flow meter
September 29, 2021
DN100 integrated electromagnetic flowmeter for water, 220V power supply, On-site display, 4-20mA output + RS485 communication, Flange connection, Carbon steel...
Read More
Liquid conductivity
September 21, 2021
The prerequisite for using an electromagnetic flowmeter is that the liquid to be measured must be conductive and cannot be...
Read More
Insertion type target flow meter for VOC contains Hydrofluoric acid
September 20, 2021
Customer request: Dear Michael, Thanks for your email reply. For the application of gas flow as below. 1. Please see the...
Read More
Verification method of gas turbine flowmeter
September 19, 2021
In the history of the development of flow measurement and testing technology, flow and device verification technology are the two...
Read More
Maintenance of turbine flowmeter
September 18, 2021
In order to ensure the long-term normal operation of the turbine flowmeter, it is necessary to frequently check the operating...
Read More
Viscosity and temperature
September 17, 2021
It is generally believed that the volume flow measured by the electromagnetic flowmeter is not affected by the viscosity and...
Read More
Adhesion and precipitation
September 16, 2021
When measuring fluids that are easy to adhere to and precipitate substances on the tube wall, if the attached is...
Read More
Electromagnetic flowmeter Contains drift gas
September 15, 2021
If the drift gas contained in the liquid is only tiny bubbles, it can still work normally, but the measured...
Read More
Avoid electrode surface effects
September 14, 2021
The corrosion resistance of the electrode is an important factor in the selection of materials, but sometimes the electrode material...
Read More
Electrode selection of corrosion-resistant materials
September 13, 2021
The corrosion resistance of the EMF electrode is required to be very high, and corrosion is not allowed, or strictly...
Read More
The main sources of electromagnetic flowmeter failures caused by piping systems and related equipment are as follows
September 12, 2021
Poor installation Not full tube Gas storage in the piping system Constantly inhale gas Flow status changes during use 1....
Read More
electromagnetic flowmeters failure from the fluid side
September 11, 2021
1.The liquid contains gas The dissolved gas in the liquid will not affect the flow measurement, and the free gas...
Read More
electromagnetic flow meter failure caused by environment
September 10, 2021
1. Strong magnetic field Since it is generally noted to be far away from the strong magnetic field during installation,...
Read More
Commonly used flow velocity in the pipeline
September 9, 2021
Average velocity: m/s. For the reference of the electromagnetic flow meter. Type of fluid Application occasions Type of pipe Average...
Read More
Considerations for electromagnetic flowmeter selection
September 8, 2021
If the primary selection has been determined to adopt the electromagnetic flowmeter measurement method, the instrument selection becomes the specific...
Read More