admin_zero

The Dimensional drawings are as follows: The body height, line size, flange diameter, etc  

The target flowmeter selection is important. The pipe diameter difference and the sensor will vary. Also, the testing equipment will be different. Here is a listing of some of the Zero Instrument workshop testing equipment for the target flow meter.  

Integrated electromagnetic flowmeter Field display(on-site display) 24V power supply, 4-20mA output, Neoprene lining, 316L electrode, Flange connection without paired flanges, Temperature resistance -20 ~ 60 °C, Protection Class IP65: DN200: Pressure 1.6 MPA, measuring range: 57-570 m3/h

Serial number: Location: PURPOSE:  Air +Cl Z100TF-SBL-CQ400 HCNIX Number:                       D a t a A1 Name of medium Air +Cl B1 density  kg/m3 C1 caliber mm 400 A2 Temperature condition Degree C 435 B2 Display Mode ON-SITE LCD C2   Target Material Hastelloy   A3

Serial number: Location: PURPOSE: Air                                                              Z100TF-SBL-CQ400 HCNIX Number:                       D a t a A 1

Split-type electromagnetic flowmeter, Field display(on-site display) 24V power supply, 4-20mA output, Neoprene lining, 316L electrode, Flange connection without paired flanges, Temperature resistance -20 ~ 60 °C, Protection Class: Sensor IP68, Converter IP65, Including 10 meters signal line DN400: Pressure 1.0 MPA, measuring range: 226-1360 m3/h DN800: Pressure 1.0 MPA, measuring range: 543-5400 m3/h

Zero Instrument provides the following gas application for our customers. GAS: AIR + CL HIGH TEMPERATURE: 435°C PRESSURE: 1.38 KPA Supply 24 to 30 VDC Output 4 to 20 ma Pipe size for prosses 16 inch Pipe size to inlet the target flowmeter 8 inch Max flow 5,600 m3/h or 7000 kg/h This plug-in type

Transducer Mounting Allocation The first step in the installation process is to select an optimal location for installing the transducers in order to make the measurement reliable and accurate. A piece of basic knowledge about the piping and its plumbing system would be advisable. An optimal location would be defined as a long straight pipeline

Before installation, choose density pipe to install transducers and clean the installation area, clear away rust, paint, anti-rust layer, it is the best to use an angle grinder to polish, use cleaning cloth with alcohol or acetone to clear oil and dust, coat enough couplant around the center of the installation area, attach the transducers

Power-on errors When powered on, the ultrasonic flowmeter automatically starts the self-diagnosis process to find if there are any hardware and software problems. If a problem is identified, an error message will be displayed. The following table shows the possible error messages, the corresponding causes, and their solutions. Error message  Causes Solutions ROM Testing Error