admin_zero, Author at Just Measure it - Page 79 of 369

admin_zero

Does a Safety Instrumented System (SIS) Need a Dedicated Operator Station?

PLC /

In process industries such as oil & gas, petrochemicals, and power generation, the Safety Instrumented System (SIS) plays a critical role in preventing hazardous events and protecting people, equipment, and the environment.One frequently asked question in SIS design is: Should the SIS have its own dedicated operator station, or can it share the same station […]

Does a Safety Instrumented System (SIS) Need a Dedicated Operator Station? Read More »

Application of Radar Level Transmitters in Diazo Reaction Kettles

Level meter /

In modern industrial production, precise level measurement is not only crucial for enhancing production efficiency but also serves as the foundation for process safety and stability. With technological advancements, radar level transmitters, known for their unique non-contact measurement capabilities, have demonstrated exceptional value in complex industrial environments such as diazo reaction kettles. A diazo reaction

Application of Radar Level Transmitters in Diazo Reaction Kettles Read More »

Mass Flowmeter Troubleshooting: Common Pitfalls and How to Avoid Them (With Practical Cases)

Flow meter /

1. Preparation  Before starting troubleshooting work, contact the production unit to understand the fault phenomenon and operating status by checking historical trends, valve openings, and communicating with operators. Initially determine whether the problem is caused by the instrument or the process. – For general measurement loops: Obtain process permission before starting work. – For control

Mass Flowmeter Troubleshooting: Common Pitfalls and How to Avoid Them (With Practical Cases) Read More »

Understanding the Difference Between Nm³ and m³ in Gas Measurement

Instrumentation /

1. Introduction In industrial gas measurement, two units often appear in technical documents and trade contracts: m³ (cubic meter) and Nm³ (normal cubic meter).While both express volume, their meanings differ significantly due to the influence of temperature and pressure. Understanding the distinction is essential for accurate measurement, energy calculations, and commercial transactions. 2. Definition of

Understanding the Difference Between Nm³ and m³ in Gas Measurement Read More »

Tungsten-Cobalt Alloy Wear-Resistant Thermocouples – Advantages over Other Types

Thermocouples /

1. Overview Brief introduction to tungsten-cobalt alloy (WC-Co) wear-resistant thermocouples, their typical applications, and why they are compared with ceramic, high-chromium cast iron, and bimetallic types. 2. Key Advantages 2.1 Superior Wear Resistance – Ideal for High-Hardness Particle Environments WC-Co hardness: HRC 65–90 (depending on cobalt content) 3–5 times the wear resistance of alumina ceramics

Tungsten-Cobalt Alloy Wear-Resistant Thermocouples – Advantages over Other Types Read More »

Application of Guided Wave Radar Level Meter in Liquid Level Measurement of Distillation Columns

Level meter /

In industrial fields such as chemical and petrochemical industries, distillation columns are common separation equipment used to separate components in mixtures based on differences in boiling points or vapor pressure. The efficient operation of distillation columns relies on precise control of the liquid level within the column, as the accuracy of liquid level measurement directly

Application of Guided Wave Radar Level Meter in Liquid Level Measurement of Distillation Columns Read More »

Temperature Measurement Accuracy of Tungsten-Cobalt Alloy Wear-Resistant Thermocouples

Thermocouples /

The measurement accuracy of a tungsten-cobalt alloy wear-resistant thermocouple is not determined by the tungsten-cobalt alloy sheath material itself. Instead, it depends on the thermocouple core type, overall structural design, and installation and operating conditions. 1. Key Factor: Thermocouple Core Type The tungsten-cobalt alloy acts as a protective sheath against abrasive wear and does not

Temperature Measurement Accuracy of Tungsten-Cobalt Alloy Wear-Resistant Thermocouples Read More »

Are Measurement Instruments the Key to Safety in Chemical Plants?

Instrumentation /

In chemical manufacturing, measurement instruments are not only vital tools for precise control of production processes but also serve as crucial safety barriers that protect personnel, equipment, and the environment. Establishing an effective system of measurement instruments can significantly reduce the risk of accidents and ensure sustainable and safe production. 1. The Role of Measurement

Are Measurement Instruments the Key to Safety in Chemical Plants? Read More »

Where Should a Check Valve Be Installed in a Pump System?

Valve /

Check valves play a vital role in pump systems, ensuring water flows in the correct direction and preventing backflow that could damage equipment or disrupt operations. Correct installation is essential not only for system efficiency but also for the long-term protection of pumps and pipelines. In this article, we’ll explore two common installation positions for

Where Should a Check Valve Be Installed in a Pump System? Read More »

Understanding 2-Wire, 3-Wire, and 4-Wire RTD Connections

Instrumentation /

Resistance Temperature Detectors (RTDs) are widely used in industrial and laboratory environments for accurate temperature measurement. However, their wiring configuration plays a crucial role in ensuring measurement accuracy. The three main wiring types—2-wire, 3-wire, and 4-wire—differ in complexity, cost, and precision. 1. 2-Wire RTD Connection In a 2-wire configuration, one lead wire is connected to

Understanding 2-Wire, 3-Wire, and 4-Wire RTD Connections Read More »

Translate »