admin_zero

A rotameter, commonly known as a variable area flowmeter, is typically not suitable for horizontal installation due to its design and operating principles. The fundamental working mechanism of a rotameter involves the movement of a float within a tapered tube. As the fluid flows through the tube, the float rises or falls depending on the […]

1. General This technical specification and its attachments set out the minimum technical requirements of the Buyer for the standard orifice flowmeter required by Company X for the annual production of Project X. The standard orifice flowmeter supplied by the Seller shall comply with the requirements of this technical specification, and any deviation must be

A differential pressure (DP) flow meter is a widely used flow measurement instrument across various industries, including oil and gas, chemical processing, and power generation. It is particularly effective for measuring the flow of gases and liquids, including corrosive gases, when designed with appropriate materials. This type of flow meter operates based on Bernoulli’s principle,

I. Common occasions where ultrasonic flowmeters are mainly applicable 1. Environmental protection field: municipal sewage measurement, factory sewage discharge detection, etc. In this occasion, time difference method and Doppler method ultrasonic flowmeters are widely used. 2. Oilfield: cementing mud flow measurement, oilfield oily sewage flow measurement, water injection flow measurement, etc. 3. Water company: raw

1. Working Principle of Vortex Flow Meters: The principle of the vortex flow meter is to place a bluff body in the flow meter pipe. When fluid flows past the bluff body, due to the flow separation at the bluff body’s surface, two alternating vortex streets are generated downstream, known as Karman vortex streets. The