In modern industry, the guided wave radar level meter has become an essential measuring instrument in various production processes. With increased use, problems in measurement can manifest themselves, and there are many problems that are caused by incorrect installation.
Therefore, when installing the guide wave radar level meter, reasonable standards and processes are very important to ensure that the equipment can read out the level and operate correctly. This article will introduce the installation standards and precautions for guide wave radar level meters respectively.
Installation standards for guided wave radar level meter, choose the appropriate installation location. When choosing the installation location of the level meter, the following points need to be noted: Determine the range of level measurement: According to the measurement purpose and actual requirements, determine the range and location where the level meter needs to measure.
Avoid interference: need to avoid installation in locations that will be disturbed, such as dusty areas or areas of high vibration. To ensure operation and safety: need to ensure that the installation location is easy to operate and maintain, and will not affect personal safety.
Install the equipment according to the manual and the actual situation of the equipment. Vertical installation: Make sure the equipment is vertical to the ground so that it can ensure accurate measurement of liquid level. No interference: Before installation, make sure there is no interference from other things, such as heat sources, cables, etc.
Fixed equipment: To ensure measurement accuracy, the equipment should be fixed with bolts or other means to ensure that the equipment will not vibrate or tilt.
Connecting cables: To ensure that the instrument is properly energized, the following points need to be noted when connecting cables: the choice of wiring material; the equipment connection of cables needs to be connected according to the correct wiring method to avoid interference and other factors; according to the equipment manual to ensure that the power and current meet the requirements; when docking, protective connectors need to be used to prevent external dust, language, water and other erosion from entering the interior of the equipment.
Installation precautions, equipment protection in the use and installation process, need to pay attention to the protection of the equipment to avoid damage or other unexpected factors; regular inspection of the normal operation of the equipment on a regular basis, such as whether the technical parameters of the level meter is legal, whether the cable heat is normal, etc.
Maintenance, the equipment needs to be maintained and cleaned before use, and it should be ensured that there is no equipment failure due to installation of debris or dust and other factors.
After a long period of operation, the equipment needs to be cleaned and replaced or upgraded to ensure the maintenance and upkeep of the equipment.
In conclusion, the successful installation of the guided wave radar level meter in accordance with the standards and requirements can promote the modernization of production and management, and will also save cost and improve efficiency for customers in actual production.