Level meter

The first thing to do is to have the correct method of use and to master the formal and correct methods of operation in order to ensure its longevity. It can be said that if used and operated improperly, any radar level meter and any equipment will have problems that will affect the performance and […]

What is heavy oil? Heavy oil is the oil that remains after diesel and petrol have been extracted from crude oil. The composition of this oil includes hydrocarbons, sulfur, and inorganic compounds. Of these, hydrocarbons make up a large proportion, the other two being small amounts and traces. What do I need to consider when

In the pharmaceutical industry, the measurement of pharmaceutical solutions plays a major and important role. The accuracy of the measurement is directly related to the quality of the medicine, and the suitability of the measuring instruments is directly related to the composition and content of the medicine. The pulsed radar level meter uses contactless radar

Firstly, the data display is inaccurate. There are actually many reasons for such a fault. For example, a sudden power failure occurs before the data has finished being stored, which in turn leads to an abnormal data display. The first thing we should do in this case is to re-check, reset and calibrate the radar

1. Lightning protection starts with grounding fractions. The housing of the radar level meter is very similar to the control cabinet, special console, power cabinet, etc. The housing should be adjacent to the common flat steel. The instrument task power supply, e.g. 24 V negative terminal, is connected to the instrument earth and the input

We first need to understand the measurement principle of the radar level meter, the radar level antenna emits a narrow microwave pulse, which is transmitted downwards by the antenna. When the microwave touches the surface of the measured medium, it is reflected back and received again by the antenna system, which transmits the signal to

Dust Protection In the external to the instrument dust is very simple, only need in the radar level meter external plus a layer of protective cover or placed in a sealed box, you can maximize the protection of the instrument, for the measured medium contains dust, impurities and particles, such protection measures. In addition to

The radar level meter uses microwave pulse measurement and can operate normally in the industrial frequency band with low beam energy. It can be installed in a variety of metallic and non-metallic vessels or pipes for non-contact continuous level measurement of liquids, slurries and granular materials. It is suitable for applications where dust, temperature and

The RD90X series 26G HF radar level has a small antenna size for easy installation; non-contact radar, no wear, and tear, and no contamination. Virtually unaffected by corrosion, foam, atmospheric water vapor, temperature, and pressure changes. Severe dusty environments have little effect on the operation of HF level meters. Shorter wavelengths for better reflection on

Many of you have questions about the need for a waveguide tube for radar level meters, which are usually used for liquid measurements as they do not require direct contact with the medium.   However, some people install waveguide tubes when using high-frequency radar level meters, while others do not, so what is the specific