Level meter

1. Level Measurement Requirements in the Power Sector Power generation environments are characterized by high temperature, high pressure, and the presence of corrosive chemicals. Accurate and reliable level measurement is essential across many systems to ensure operational safety, efficiency, and regulatory compliance. Key application scenarios include: Chemical Water Treatment Systems: Monitoring demineralized water tanks and […]

1. Pre-Installation Checklist 1.1 Environmental Inspection Ensure there are no strong electromagnetic interference sources nearby, such as VFDs or large motors. Confirm that the power supply matches the device’s rating (either DC 24V or AC 220V as indicated on the nameplate). Inspect the inner tank wall. If welding seams or rough surfaces are present, install

1. Initial Inspection and Power-On Self-Test 1.1 Visual and Connection Inspection Ensure the probe surface is clean and free from contaminants. The emission surface must not be obstructed by food residues, foam, or debris. Verify that the shielded cable between the probe and controller is securely connected without looseness or poor contact. Confirm the power

Ultrasonic level transmitters are widely used in industrial process monitoring due to their non-contact measurement and robust adaptability. Among them, four-wire and two-wire ultrasonic level transmitters are two common types, each with distinct characteristics in wiring design, measurement performance, functionality, and cost-effectiveness. This article provides a comprehensive comparison to help users make informed selection decisions

Selecting the appropriate level measurement device for a 30-meter tall silo is critical to ensure efficient and accurate inventory management. Silo environments can vary widely, depending on the type of material stored (e.g., granular solids, powders, or liquids), as well as environmental factors like dust, temperature fluctuations, and pressure. Below is an in-depth overview of

Maintaining the cleanliness and hygiene of ultrasonic level sensor probes is essential to ensure accurate measurement and prolong the device’s service life, especially in food production environments. This guide provides detailed, standardized procedures for cleaning, disinfecting, and maintaining food-grade ultrasonic level probes. 1. Preparations Before Cleaning 1.1 Power Disconnection Disconnect the power supply to the

Ultrasonic level sensors are widely used in the food and beverage industry for applications such as tank level monitoring, filling line control, and ingredient inventory management. However, selecting the right sensor for hygienic environments requires careful consideration of performance, compatibility, and regulatory standards. This guide outlines the key selection criteria, environmental compatibility, and application-specific recommendations

In today’s rapidly advancing industrial landscape, precise and efficient measurement technologies are indispensable. Among these, radar level measurement stands out for its exceptional performance, particularly in measuring liquid levels within distillation tanks. Its unique advantages have revolutionized this area of industrial measurement. Importance of Level Measurement in Distillation Processes Distillation is a critical process in

Magnetic level gauges have become a critical component in the new energy sector due to their high reliability, clear visual indication, and adaptability to harsh environments. This article explores their applications, technical advantages, representative case studies, and challenges in various new energy domains. 1. Core Applications in the New Energy Industry 1.1 Liquid Level Monitoring

Introduction: Wireless Innovation in Industrial Measurement In today’s rapidly evolving industrial landscape, having the right tools to monitor and control processes can make a significant difference. The integration of Bluetooth-enabled level transmitters represents a new frontier in smart, efficient, and safe industrial operations. These devices allow users to configure and monitor level measurement systems remotely,