Flow meter

INTRODUCTION The fluid conductivity and abrasiveness, the maximum and minimum process pressure and temperature, the size, and the width of the pipe are all to be considered in the selection, installation, and use of electromagnetic flowmeter to measure raw water, potable water, and irrigation water. The electromagnetic flowmeter measurement of raw water, potable water, and […]

Customer request: 2-wire Magnetic Flow Meter 0-1375 m3/hr PTFE SS316 350 mm/CL 150 Remote Transmitter IP65 24 VDC Loop Powered 4-20 mA M20 x 1.5 ISO Zero Instrument supply: DN350 Remote type electromagnetic flowmeter,  Remote display,  24V power supply,  4-20mA output,  Carbon steel body,  PTFE lining,  316L electrode,  American standard 150LB flange connection,  Temperature resistance

Customer requirements: We need 1/2″ thread type, the pressure is 0.1 to 5 bar, test medium is ether and alcohol. The flow range is 5 gallons per minute and 300 gallons per hour. Actually, the flow pressure is low so kindly confirm the flow rate is accurate for low-pressure measurement. you may think of 0.2bar

INTRODUCTION. Alcoholic beverages are liquid consumables that have come to stay in our world today. Occasions ranging from weddings, birthdays, and other anniversaries have made the demand for alcohol a global concern to its users even in ordinary times. Some use it as a form of relaxation and have a good time with members of

Almost every commercial industry produces wastewater. For many, it is important to monitor the amount of wastewater being produced in order to comply with environmental regulations and/or disposal fees. Measuring the effluent—or discharge flow–is problematic. But as you will see below, there is a solution.   Types of Industries that Produce Wastewater As previously mentioned,

DN250 split electromagnetic flowmeter, 220V power supply, 4-20mA output, On-site display, Flange connection (without matching flanges, bolts, and nuts), Pressure resistance 1.6MPa, Temperature resistance -20~60℃, Carbon steel body, Neoprene lining, 316L electrode, Protection class IP65, With a 10meters signal line. Flow range: 88-880m³/h Weight is 85kgs or so.

¿Su industria tiene la necesidad de medir el flujo de líquidos a través de una tubería? Si respondió “Sí”, entonces pregúntese si ¿se trata de materiales semilíquidos / sólidos, como cemento, productos alimenticios, lechada o una corriente de tratamiento de desechos? ¿Sigue respondiendo “¿Sí?” Si la medición precisa de materiales difíciles de medir es parte

It is a high-temperature type and up to 435 degrees. Inspection Report of the Target Type Intelligent Flow Meter Type: SBL-CQ400HCNIX DN: 400 mm Code: 210309002002 Operating pressure: 1.38 KPa Standard density: 1.25 kg/m³ d: Φ 160=85*250 mm Sensor spec.: 0.1 kɡ Discharge Coefficient : 7184/400 Temperature coefficient Ct: 1050 d/D： 0.4 CP: / Temp.

Heavy industry and manufacturing often have the need to measure the flow of materials through pipes and processes. When the material is a free-flowing liquid, there are many means to do this. However, when the plant is pumping cement, pulp, or slurry, this measurement can become problematic. Many flowmeters depend on a sensor positioned within

06 Each (Piece)   Ø1/2” Flowmeter, for low flow *Flow Range: 0 – 25 Liter/Hr. Approx.   *Fluid: Reagents (Example: Antifouling)  (The fluid is light yellow in color, it is not transparent) *PH: 3 – 4  *Pressure approx.: 100PSI *Temperature: Ambient  *To connect to stainless steel tubing and PVC Ø1/2″ The material is SS304.