Zero Instrument provides for one of our Pakistan customer requirements. S# TAG TAG # Size Type Density Cp Temp Pressure Normal Flow Max Flow Qty Vortex Flow Meter 1 FT 500411 50 mm Vortex 764 0.46 75 °C 6 bar 10.6 / 13 m³/h 0 ~ 15.0 m³/h 1 2 FT 500611 150 mm Vortex […]
Distillation & Fermentation Instrumentation Material For Modification 2021 Read More »
DN25 integrated electromagnetic flowmeter 4-20mA output on-site, 220V power supply, PTFE lining, 316L electrode, Carbon steel body, Temperature resistance -20~120℃, National standard flange connection (without matching flanges, bolts) Nut), Protection grade IP65, Measuring range: 0.9-18m³/h
DN25 integrated electromagnetic flowmeter Read More »
As with all newly purchased meters, when the mass flow meter ordered arrives, the unpacking inspection should be carried out first. Usually, the unpacking inspection should be carried out according to the following steps: First, visually inspect the outer packing box. Before unpacking, check the outer packing box of the flowmeter. Because abnormal phenomena may
Mass flowmeter unpacking inspection Read More »
A turbine flowmeter is more sensitive to the influence of the velocity distribution of the inlet fluid. The inlet flow state depends on the piping structure at the inlet of the flow meter. In principle, it is required to have a straight pipe section long enough to eliminate the symmetrical and stable cross-section of the
Turbine flow meter Influence of flow Read More »
A turbine flowmeter is a speed-type instrument. The change of density will increase or decrease the rotating torque acting on the impeller proportionally, thereby affecting the displayed volume flow. In the case of measuring liquid, because the density of the liquid changes little, and the bearing friction torque is as small as possible in the
Turbine flow meter Influence of fluid density Read More »
There are two reasons for the pressure loss of the turbine flowmeter. One is part of the pressure loss caused by the mechanical resistance of the turbine rotor to the kinetic energy of the fluid. The greater the flow, the higher the speed of the turbine, the greater the mechanical resistance, and the greater the
Turbine flow meter Pressure loss characteristic curve Read More »
Introduction For many years, differential pressure meters were the only devices available for measuring volumetric flow rate in a pipe with reasonable accuracy at a reasonable cost. Nowadays there are many alternatives, but even so, the differential pressure meter family still holds the largest slice of the market. Advantages The popularity of differential pressure meters
Differential pressure meters Read More »
The development of flow measurement technology and the application demand in the national economy are always interdependent. In a sense, application and demand are the driving force to promote the development of flow measurement technology. Although there are many types and specifications of flow meters so far, with the rapid development of social production, the
Development of Mass Flow Measurement Technology Read More »
In order to ensure the measurement accuracy of the mass flowmeter and long-term stable and regular work, the mass flowmeter should be installed reasonably, used correctly, and strengthened daily maintenance and management. Among various types of flow meters, Coriolis mass flow meters are the most widely used. This chapter will discuss the daily maintenance and
Coriolis mass flowmeters daily maintenance Read More »
If you want to measure the mass flow of the fluid, you need to use a mass flow meter. Due to the disadvantages of indirect mass flowmeters, such as many error factors, low accuracy grade, and complex structure, direct mass flowmeters should be considered when conditions permit. Coriolis, calorimetric, and impulse flow meters are the
Selection principle of mass flow meter Read More »
