admin_zero

In industrial measurement, a wide range of conditions can be encountered, from the relatively simple to the very complex. The principle of our selection is that it must be based on the actual working conditions, so today we will look at how to choose a radar-level meter for working conditions with water vapor. The radar […]

In the petrochemical industry, radar level meters and guide wave radar level meters are both relatively commonly used level meters. Some users often ask which one is the most suitable.  In fact, the choice of radar level meter or guide wave radar level meter needs to be determined according to the working conditions.  Today we

The evaporation process is an important process of chlor-alkali production, the accurate measurement of the liquid level of each evaporation tank in the process is the key to realizing the caustic soda evaporation process in the alkali automation production.  So that its level measurement has also become a relatively important thing for each enterprise, once

The working conditions of sewage nullahs are characterized by large fluctuations in water quality, low ambient temperatures and foam accumulation on the water surface, etc. Due to the complex working conditions, it is not particularly easy to choose the right level meter. Today we will analyze the characteristics of several level meters to see which

In the cement industry, radar level meters are often used to measure the level of the material in order to facilitate observation and safe production. Today, the characteristics of different media in the cement industry and the features of radar level meters are combined to illustrate what are the selection principles of radar level meters

1. Range and blind spot The range and blind spot are two important indicators of the ultrasonic level meter. The range represents the range that can be measured by this level meter. It is the sensitivity of the transducer that is reflected. In other words, the larger the range, the higher the sensitivity. Most manufacturers’

In this era of rapid development of automated processes, manual measurement is about to become history and the radar material meter has become the most common level measurement tool today. However, in the process of measurement, it also faces various unexpected problems, so the measurement results will be inaccurate, resulting in errors for a number

1. Overflow protection, for which a corresponding distance can be established which is the blind spot. 2. The size of the measuring range is related to the antenna because the accuracy of the antenna varies from one size to another. 3. The measuring range is calculated from the point where the microwave beam reaches the

1. Measurement without interference, independent of the site conditions, a wide range of applications, almost all kinds of industries, and non-contact detection without pollution, can be measured accurately. 2. The measuring range is free from interference, e.g. interference caused by joints or noise from incoming and outgoing material. 3. Safety, energy efficiency, and environmental friendliness.