The Controller Area Network (CAN) bus is a robust and widely used communication protocol, especially in automotive and industrial environments. It was originally developed to enable microcontrollers and devices to communicate with each other without the need for a host computer. Over the years, several variations of CAN bus systems have been developed to meet […]
Overview of Different Types of CAN Bus Systems Read More »
1. Overview The intelligent vortex flowmeter is mainly used for measuring the flow of fluids in industrial pipelines, including gases, liquids, and steam. Its characteristics include low pressure loss, a wide range, and high accuracy. It is almost unaffected by fluid density, pressure, and temperature parameters when measuring the working volume flow. With no moving
Analysis and Troubleshooting of Vortex Flowmeter Malfunctions Read More »
In the fields of water resource management, flood warning and sewage treatment, radar water level meter has become an important monitoring tool with its non-contact measurement method, high accuracy and strong adaptability. However, choosing a suitable radar water level meter is not easy, and many factors need to be considered to ensure the accuracy of
What should I pay attention to when buying a radar water level meter? Read More »
Verification and calibration may seem similar at first glance, but they are fundamentally different processes. Both fall within the realm of metrology and require comparing the measured values of an instrument against a higher-precision standard. In this way, both verification and calibration play a crucial role in ensuring traceability and maintaining measurement accuracy. However, the
The Differences Between Verification and Calibration Read More »
In grain storage management, accurate inventory measurement is an important part of ensuring smooth logistics and reducing losses. As a common storage material, the physical properties of wheat have a significant impact on the selection of measurement tools. Radar level meters are widely used in monitoring wheat storage due to their non-contact measurement and high
Application of radar level meter in wheat measurement Read More »
1. Range The range refers to the span between the minimum and maximum values that a measuring instrument can measure. This is crucial in determining the suitability of the instrument for different types of measurements in various industrial applications. 2. Measuring Range Similar to the general range, the measuring range specifies the exact limits within
Layer of Protection Analysis (LOPA) is a semi-quantitative risk assessment tool commonly used in industries where safety and risk management are critical, such as chemical processing, oil and gas, and power generation. LOPA evaluates potential hazards and assesses whether the existing protective measures are sufficient to reduce the risk to acceptable levels. By quantifying the
The irregular arrangement of the flags on the display panel of the magnetic flap level gauge may be caused by a variety of factors. The following is a detailed and in-depth analysis of these reasons: 1. The stability of the magnetic properties of the magnetic steel in the magnetic float The magnetic flap level gauge
Current output transmitters are widely used in industrial applications to convert physical quantities such as pressure, temperature, or flow into a standardized electrical signal (usually 4-20mA). These devices are typically classified into three wiring configurations: two-wire, three-wire, and four-wire. Properly wiring a current output transmitter is essential to ensure accurate signal transmission and prevent potential
Detailed Guide on Wiring for Current Output Transmitters Read More »
The Uninterruptible Power Supply (UPS) plays a crucial role in automation equipment, especially within high-stakes environments like chemical plants. As a safeguard for automated control systems, the UPS ensures continuous power supply to critical equipment, even when external power sources are compromised. The performance and maintenance quality of the UPS directly impact the entire chemical
Ensuring Operational Safety: The Crucial Role of UPS Maintenance in Chemical Plants Read More »
