Radar level meter is widely used in energy, petrochemical, metallurgy, building materials, water conservancy, grain, and other industries.
It has the advantages of low maintenance, high performance, high accuracy, high reliability, and long life. Because the transmission of the microwave signal is not affected by the atmosphere, a radar level meter has more obvious advantages than contact instruments such as capacitors and weight.
It can meet the requirements of harsh environments such as high temperature, high pressure, steam, vacuum, high dust, and volatile gas in the process.
It is suitable for high temperature, high pressure, vacuum, steam, high dust, volatile gas, and other harsh environments, and can continuously measure different levels. Although the radar level meter is very high quality, there are some checks that need to be paid attention to after installation and before use, today we will see what aspects need to be checked.
First of all, the site inspection is to check whether the installation position of the instrument is correct so as not to affect the actual working condition of the instrument, and also to observe whether the actual working condition of the site matches with the model of the radar level meter so as not to affect the normal working condition of the instrument. Therefore, on-site inspection of the radar level meter is basic work to ensure the stable and normal operation of the instrument and should not be neglected.
Then perform the connection check, this part overlaps with the field check, the linear development of the radar level meter is mainly observed by connecting the corresponding software. Generally speaking, instruments with keys can realize this function. Of course, users can also check the connection of the radar level meter through professional instruments to judge whether the radar level meter can work normally.
Finally, the power-on check, after power-on, you can observe whether the radar level meter gradually enters and displays normally according to the normal start-up procedure.
In addition, many abnormal phenomena are found after energizing, and some are not even energized, resulting in the instrument not working properly. Therefore, the energization check should be carried out under the conditions allowed on site to observe whether the radar level meter parameters are normal.
The above is the check that should be carried out before using the radar level meter after installation to ensure that the instrument can be used normally and does not affect the normal work progress