Technical Data
- Applicable to various nominal diameters: from DN15～DN3000mm
- Suitable for high and low-temperature media: from -196℃～+500℃; higher temperature and manufacturers to negotiate
- Applicable to low, medium, and high-pressure conditions
- With integrated temperature and pressure compensation, direct output quality or standard square
- With optional small signal removal, non-linear correction, filtering time can be selected
- Can accurately measure a variety of normal temperature, high temperature, low-temperature conditions of gas, liquid flow
- Sensitivity, can measure the ultra-small flow, its measurable low flow rate of 0.08m/s;
No moving parts, the use of - Accurate measurement
- Wide measurement range, the maximum measurement range up to 20:1 (liquid) or 10:1 (gas)
- Good repeatability, generally 0.05 ~ 0.08%, fast measurement
Advantages of target flow meter
Small pressure loss, only about 1/2 △ P of standard orifice plate;
Anti-interference, the anti-impurity ability is particularly strong;
Convenient calibration can use the dry calibration method, that is, using the weights hanging weight method. The single-key operation can complete the calibration;
According to the actual need to change the flow resistance and the flow range;
Low-power battery on-site display, online direct reading of the display value, the display screen can simultaneously read the instantaneous and cumulative flow and percentage bar graph;
Simple and convenient installation, very easy to maintain;
A variety of output forms, can remote transmission of various parameters;
Strong vibration resistance, a certain range of pulsating flow can be measured;
Instrument built-in self-test program, fault phenomena at a glance.
Online detachable target flowmeter truly realizes high accuracy and stability, it has the traditional orifice plate, target, vortex street, and other flowmeter that have no moving parts, but also has a comparable measurement accuracy with the volumetric flowmeter, coupled with its unique anti-interference, anti-impurity performance, can be disassembled at any time,
In addition to replacing the conventional flow can be measured by the flow measurement problems, especially in the low-flow, high-viscosity, easily condensed and easy to block, high temperature, strong corrosion, strong vibration, and vibration.
High temperature, strong corrosion, strong vibration, and other flow measurement difficulties in the working conditions have a very good adaptability.
At present, it has been widely used in metallurgy, petroleum, chemical industry, energy, food, environmental protection, and other areas of flow measurement.
Removable target flow meter installation
- Weld the welding short pipe to the pipe;
- Bolt the ball valve onto the welded short pipe;
- Fix the retractable flowmeter device with bolts on the ball valve; (Note: Fixed according to the direction of the arrow)
- All fixed, slowly open the ball valve, the flow meter slowly screwed into the pipeline, screwed into place according to the milled arrow slot aligned into a one-line (to ensure that the target piece is facing the direction of the fluid), and then the 6 locking screws fastened and then adjust the meter zero point can be.