Firstly, the data display is inaccurate. There are actually many reasons for such a fault. For example, a sudden power failure occurs before the data has finished being stored, which in turn leads to an abnormal data display. The first thing we should do in this case is to re-check, reset and calibrate the radar level meter once the power has been restored.
After this step is done and it is still abnormal, we should check the device fuse to see if it is burnt out and if there is a problem, replace the relevant parts in time.
Secondly, the radar communication display is abnormal. This happens, generally, because the communication equipment is faulty or the components are out of order. To solve this problem, first test the data by debugging the software, checking the status of the sensor, and then repairing the fault or replacing the corresponding components.
Thirdly, the working temperature of the equipment is abnormal. The internal temperature or the external temperature is too high, which will lead to the abnormal working temperature of the equipment. This kind of failure should take the method of blowers to cool down the temperature. High-temperature outdoor environment, the use of radar level meters, generally in the installation, is recommended to use sun and rain measures, and thus achieve the effect of temperature control and moisture.
Some of the common failures of radar level meters basically appear in the working conditions. We want to reduce the occurrence of these faults, in addition to prevention, the most critical thing is to choose a suitable radar level meter, a suitable installation location, and the correct installation procedure.
A suitable radar level meter mainly refers to the environment suitable for the model. A suitable installation location is a location where the data signal can be accurately transmitted and received.
The correct installation procedure refers to the selection of the appropriate installation method according to the actual situation. For example, if there are obstacles in the tank, a reflector plate should be added, etc.
By understanding the common faults of radar level meters, we can quickly solve problems and improve efficiency.