Coriolis mass flow controller - Just Measure it

Introduction

The ACU20FE series Coriolis mass flow controller/flowmeter is a precision instrument designed for high-precision measurement of fluids by ACCU using Coriolis technology and through a series of technological innovations.

Compared with other technologies, Coriolis technology is characterized by the fact that the measurement is completely unaffected by the characteristics of the fluid, resulting in extremely high accuracy. The technique is therefore suitable for very accurate measurement of very small flow rates. 

ACU20FE series not only measures mass flow, but also simultaneously measures the density and temperature of a fluid, and offers two different levels of accuracy: For liquids, the measurement accuracy can reach ± 0.25%, For gases, the measurement accuracy can reach ± 0.5%. 

This level of accuracy is sufficient to meet various experimental scenarios in the laboratory, and it can also calmly deal with complex and ACU20FE Features changeable industrial environments.

1. High precision, good repeatability:

Because the product directly measures the mass flow of the fluid and has no thermal drift, the temperature shift and time drift can be ignored. The measurement accuracy of gas can reach ± 0.5 F.S, and the measurement accuracy of liquid can reach ± 0.25, covering most high-precision measurement scenarios.

2. High reliability and stability:

It can withstand extreme environmental tests :When the product is working in a vibration environment, if it is subject to accidental physical interference such as object collision or bumps, the measurement can be immediately restored to a stable working state within 400 milliseconds.


3. millisecond response and regulation speed:
Compared with similar measurement technology, the product takes advantage of Coriolis technology and controls the control and measurement response time within 500ms and 100ms respectively.

4. Can measure high viscosity fluid and high density gas:

The product measures a wide range of fluids, such as lubricating oil, liquid nitrogen and other high-density fluids, can also be accurately measured.
5. Function automation: integrated PID controller to adjust the flow:

The product integrates a PID controller to accurately adjust the flow, and at the same time, the embedded batch function can realize the flow control and
quantitative feeding.
6. Simultaneous output of fluid density and temperature:

Not only the mass flow data of the fluid can be obtained, but also the density and temperature data of the fluid can be obtained at the same time, which is
suitable for industrial scenarios where the density and temperature of the fluid are measured at the same time.

Contact Us

    Please prove you are human by selecting the key.
    Translate »