A ship transportation company uses our guided wave radar level measurement gasoline, normal temperature, and pressure, and guided wave radar level meter model RD701.
During the use of individual guide wave radar level meter jumping can not be measured normally, and one has the phenomenon of dead. After inspection, the after-sales engineer found that there were some problems in the installation of the on-site guided-wave radar level meter.
The heavy hammer was welded on the short pipe at the bottom of the ship, which led to too strong a signal at the bottom of the radar tank, so the radar needed to increase the blind area and then do priority reduction to weaken the signal at the bottom of the tank to make the normal measurement of the radar into the liquid.
For another dead guided wave radar level meter, after a power failure, the display button is not responsive, and the output is also dead value, after replacing the movement to restore normal.
Once a problem is encountered in the measurement, do not operate blindly, to specific problems specific analysis, can not be solved please engineer remote guidance or on-site solutions.