Level meter

A company installed our radar level meter to measure sewage, normal temperature, and pressure, the level meter model is FMW13. According to the customer’s response, the radar level meter at the site had restarted and jumped, our after-sales engineer went to the site to check and found that there was a problem with the site […]

Radar level meter adopts the working mode of transmitting, reflecting, and receiving. The antenna of the radar level meter emits electromagnetic waves, which are reflected by the surface of the object to be measured and then received by the antenna. The time from transmitting to receiving is proportional to the distance to the liquid surface.

Crude oil storage tanks are more common in chemical production, and the measurement of its level meter plays a vital role in safe production. In recent years, with the continuous development and improvement of the radar level meter industry, more and more users choose to use radar level meters to measure the level of crude

A company’s radar level meter installed in a tank farm was damaged by a lightning strike, which typically strikes a building, another object, the ground, or an external lightning protection device directly. The specific case of this site is that their tank area uses the tank itself as a flash catcher with a tank thickness

The radar level meter has the advantages of non-contact, low protection, no hanging material, anti-adhesive, high performance, high reliability, and long service life. Even in extreme temperatures, extreme pressure, strong corrosive media, volatile media, vortex agitation, scaling and dust, and other conditions can be measured reliably. A radar level meter can measure the level of

The measuring medium is slurry and the measuring distance is 10-11m for a metal conical bottom bin. The problem arises when the zero level is not displayed properly when the bin is empty. When the radar level meter has material, the measurement value is basically accurate.  After analysis, it was found that the installation position

A chemical plant uses a radar level meter to measure a process tank with a distance of 2 m. The measurement medium is chloromethane and the temperature is 13°C. The failure phenomenon is that during the production process, after pressurization, the instrument measurement data is abnormal and the level value cannot be read. After analysis,

The staff of a plant checked and found that the output of the radar level meter of the melamine unit was always at its maximum value. The staff then judged that there were obstacles blocking the transmission wave so the level meter measured the minimum distance.  After careful inspection, it was found that there was

A company uses a radar level meter to measure the liquid level of a pre-de silicon tank, which is a slurry tank with an agitator and tracer tube. It is 20 meters high and 10 meters in diameter.  The installation position is at the top of tank 1,6D to avoid the stirring paddle and does

I often hear customers in consultation with the radar level meter, will ask a question, that is, the use of the radar level meter will go wrong in the process. This is often doubting in the minds of the majority of users, in fact, there is no need to worry too much about this issue.