Level meter

Although not as widely used as non-contact radar level meters, guided wave radar level meters can occasionally be seen in all walks of life. Therefore, it is very necessary and crucial to understand the common faults of guided wave radar level meters as well as clear inspection ideas. Radar level meter faults can basically be […]

As the level of automation continues to improve, radar level meters are used in an increasingly wide range of applications. In the use of the process, radar level meters will also appear in a large or small problem. The usual solution to these problems is to identify the cause of the fault and solve the

Guided wave radar level meter selection, need to consider many factors, such as working conditions, media characteristics, etc. In fact, the guided wave radar level meter installation, also need to consider a lot, especially a few considerations are necessary to know. Do not install the steel cable too loosely when installing the guided wave radar

How to install a radar level meter in a storage tank with a heating coil. Next, we start with a case study to understand the influence of the heating coil on the radar level meter measurement. Case. Client name: A chemical plant Service location: Ningxia Detailed site conditions (temperature, pressure, medium): liquid alkali, hydrochloric acid,

Sulphuric acid storage tanks occupy an important position in the smelting industry, and the accuracy of the liquid level is directly related to the continuity of smelting production and the safe and smooth operation of automated smelting production. Therefore, when selecting and installing radar level meters, the following common problems should be noted. First, pay

Improper installation of the radar level meter can easily lead to inaccurate or unmeasurable measurements. The installation of the radar level meter does not meet the requirements, which can easily cause false echoes and affect the measurement effect. Radar level meter installation details that are not paid attention to, will also affect the measurement effect.

Non-contact radar level meter with a small antenna size for easy installation. However, wave-guided radar level meters are contacted measurement methods, and when installing them, not only the flange part of the meter head must be considered, but also the antenna part. Firstly, is it OK for the cable to wobble? The answer is of

Radar level meters often encounter data jumps in the course of use. How is this caused? How can this be solved step by step? Next, let’s look at a case study. Case study. Service location: Henan Service time: September 2021 Site details of working conditions (temperature, pressure, medium): room temperature and pressure, measuring coal lumps,

Radar level meter selection is crucial, and directly related to the accuracy of the measurement, the efficiency of the work can be improved. Radar level meter installation and maintenance, equally important, is also related to the accuracy of the measurement or not, the level meter life length. Today, the radar level meter installation and maintenance

In many cases, the radar level meter is installed inside the tank and does not meet the accuracy requirements at all. In order to gather microwave pulses and reduce scattering, one of the ways to do this is to install them inside a waveguide tube, especially where there are large fluctuations in the liquid level