Flow meter

Turndown ratio is also commonly referred to as rangeability. A turbine flow meter measurement Ratio Standard is 10:1 and has an Option of 20:1.

The installation of DN200 Plug-in type target flowmeter. The application is for air. Others application such as air and Chlorine gas.

Calculation of pressure loss of liquid turbine flowmeter To calculate whether the pressure loss has an effect on the process pipelines, the following formula is used: △P=1.2ρ. v2(Pa) △P: PRESSURE LOSS (Pa) P: Medium density (KG/M3) V: Average velocity in Tube (m/s) When the medium under test is liquid, in order to prevent vaporization and

The turbine flow meter output signal has the options of 4-20ma, pulse output, or Modbus RS485 communication.

A rotameter consists of a tapered tube, typically made of glass with a ‘float’ (a shaped weight, made either of anodized aluminum or a ceramic), inside that is pushed up by the drag force of the flow and pulled down by gravity. The drag force for a given fluid and float cross-section is a function

The length and bolt size should contact the factory.

Description LS1206B Propeller Type Current Meter is used to measure hourly average flow velocity on given points. Being light, impact, and portable, this instrument applies to rivers, pipelines, irrigation and drainage channels, hydrological investigation, and runoff experiments. Specification The Rotary Diameter for Propeller: Ф60mm The Hydraulic Thread Pitch for Propeller: H=120mm Minimum Velocity： Vo≤0.06m/s（Normal） Vo≤0.05m/s（Premium）

The sanitary electromagnetic flowmeter adopts a new type of sanitary lining material and lining technology, which meets the sanitary requirements of the food industry. At the same time, it adopts a stainless steel shell and a stainless steel clamp connection, which is convenient for the rapid disassembly and cleaning of the electromagnetic flowmeter, so that

An electromagnetic flowmeter is formed by the combination of a transmitter and a flow sensor. The work of the flow sensor is to simply convert the volume flow of the conductive liquid that flows in the pipeline, and into the linear electrical signal. The principle used for conversion is derived from Faraday’s Law of electromagnetic