Flow meter

Required Lengths of Straight Runs Flow altering devices such as elbows, valves, and reducers can affect accuracy. See the diagram below for typical flow meter system installation.   The recommended guidelines are given to enhance accuracy and maximize performance. The distance given here are minimum requirements; double them for desired straight pipe lengths. Upstream: allow

Turndown ratio is also commonly referred to as rangeability. A turbine flow meter measurement Ratio Standard is 10:1 and has an Option of 20:1.

The installation of DN200 Plug-in type target flowmeter. The application is for air. Others application such as air and Chlorine gas.

Calculation of pressure loss of liquid turbine flowmeter To calculate whether the pressure loss has an effect on the process pipelines, the following formula is used: △P=1.2ρ. v2(Pa) △P: PRESSURE LOSS (Pa) P: Medium density (KG/M3) V: Average velocity in Tube (m/s) When the medium under test is liquid, in order to prevent vaporization and

The turbine flow meter output signal has the options of 4-20ma, pulse output, or Modbus RS485 communication.

A rotameter consists of a tapered tube, typically made of glass with a ‘float’ (a shaped weight, made either of anodized aluminum or a ceramic), inside that is pushed up by the drag force of the flow and pulled down by gravity. The drag force for a given fluid and float cross-section is a function

The length and bolt size should contact the factory.

Description LS1206B Propeller Type Current Meter is used to measure hourly average flow velocity on given points. Being light, impact, and portable, this instrument applies to rivers, pipelines, irrigation and drainage channels, hydrological investigation, and runoff experiments. Specification The Rotary Diameter for Propeller: Ф60mm The Hydraulic Thread Pitch for Propeller: H=120mm Minimum Velocity： Vo≤0.06m/s（Normal） Vo≤0.05m/s（Premium）