Four DN50 High-Pressure Electromagnetic Flowmeters for a North African Industrial Project - Just Measure it

Four DN50 High-Pressure Electromagnetic Flowmeters for a North African Industrial Project

Project Overview

Zero Instrument recently completed the production and delivery preparation of four DN50 electromagnetic flowmeters for an industrial customer in North Africa.

The customer required a compact but robust flow measurement solution suitable for a higher-pressure piping system. Based on the project requirements, four DN50 electromagnetic flowmeters were manufactured and prepared for international shipment.

This project also illustrates an important part of international instrumentation supply: accurate production control, final inspection, packing verification, and flexible logistics coordination are just as important as selecting the correct flowmeter.

Customer Requirement

The customer required:

  • Product: Electromagnetic Flowmeter

  • Size: DN50

  • Quantity: 4 units

  • Design: High-pressure version

  • Application: Industrial liquid flow measurement

  • Delivery term: Originally quoted on EXW China basis

  • Final transportation request: International express delivery

Because the instruments were designed for a relatively high-pressure application, the final packing weight could not be accurately estimated before production was completed.

Instead of providing an estimated shipping cost too early, we advised the customer that the final freight quotation would be calculated after production, based on the actual packed dimensions and gross weight.

This approach helped avoid differences between estimated and actual courier charges.

Production and Final Inspection

After the technical configuration was confirmed, the four DN50 electromagnetic flowmeters entered production.

For industrial flowmeters, especially instruments intended for higher-pressure piping systems, mechanical construction and final assembly require particular attention.

Before packing, the completed instruments were checked to confirm that the supplied units matched the agreed order requirements.

Actual product photographs and videos were also prepared for the customer before shipment. Providing real production photos and videos allows overseas customers to verify the condition of the instruments before arranging international transportation.

Actual Packing Information

Once production was completed, the instruments were packed individually and the actual dimensions and weights were measured.

The final packing information was:

  • Quantity: 4 cartons

  • Gross weight: approximately 25 kg per carton

  • Total gross weight: approximately 100 kg

  • Carton size: 410 × 280 × 300 mm per carton

Measuring the shipment after packing was particularly important because express freight is normally calculated according to actual weight or volumetric weight, depending on which is higher.

For industrial instruments with flanges, pressure-rated components and relatively dense metallic construction, actual weight can be significantly different from an early estimation based only on nominal meter size.

Express Freight Arrangement

Although the original commercial quotation was based on EXW China terms, the customer later requested an express freight quotation.

After confirming the actual packing details, an international express shipping option was offered.

The final transportation proposal was:

  • Express freight: USD 1,400

  • Total shipment: 4 cartons

  • Total gross weight: approximately 100 kg

  • Estimated transit time: 6–9 days

By waiting until the goods were physically completed and packed, the freight quotation could be based on actual shipment data instead of assumptions.

This reduced the possibility of additional freight charges after the customer had already approved the shipment.

Why Accurate Packing Data Matters

For international instrumentation projects, freight is often treated as a secondary issue, but inaccurate packing information can create unnecessary problems.

Large or heavy industrial instruments may be subject to:

  • Actual-weight freight charges

  • Volumetric-weight calculations

  • Heavy-piece surcharges

  • Customs declaration charges

  • Remote-area surcharges

  • Additional handling fees

For this reason, Zero Instrument normally recommends confirming the final packed weight and dimensions before issuing a firm express freight quotation whenever the product configuration may significantly affect shipment weight.

This is especially useful for pressure-rated flowmeters, large-flange instruments and customized mechanical constructions.

Project Result

The four DN50 electromagnetic flowmeters were successfully completed and prepared for shipment.

The customer received:

  • Actual product photographs

  • Product videos

  • Confirmed packing dimensions

  • Confirmed gross weight

  • Express freight quotation

  • Estimated delivery time

The project demonstrates how a straightforward flowmeter order can still benefit from careful coordination between production, inspection, packing and international logistics.

For overseas customers, this reduces uncertainty and makes the transition from technical confirmation to final delivery much smoother.

Conclusion

Supplying an electromagnetic flowmeter is not only about choosing the correct nominal diameter or output signal.

For international industrial projects, successful delivery also depends on accurate production, appropriate mechanical design, reliable inspection, realistic packing information and transparent freight coordination.

In this project, four DN50 high-pressure electromagnetic flowmeters were completed and prepared for express delivery to a North African customer. By measuring the actual shipment after production, the final freight quotation could be provided accurately and efficiently.

Zero Instrument supplies electromagnetic flowmeters for a wide range of industrial liquid measurement applications, with different sizes, pressure ratings, liner materials, electrode materials, power supplies and communication options available according to project requirements.

Contact Us

    Please prove you are human by selecting the house.
    Translate »