Case study of target flow meter application on LPG
December 14, 2020
Based on client request, Zero Instrument provides the solution for LPG measurement. Target Flowmeter For liquid LPG PROSSES INFORMATION: LIQUID:...
Read More
how to check magnetic flow meter
December 14, 2020
For many installations a periodic check of the magnetic flow meter is mandatory. A visual inspection should be the first...
Read More
Magnetic flowmeter demineralized water
December 14, 2020
A magnetic flowmeter will not work with demineralized water. As the electrical conductivity is not enough, a turbine flowmeter is...
Read More
Target flow meter upstream downstream lengths
December 13, 2020
Flowmeter is generally installed in a horizontal position. 1, 2, and 3 are respectively the front, behind and by-pass valves...
Read More
Magnetic flow meter density
December 13, 2020
When measuring the volume flow, the density has no effect. If measuring the mass flow, it has something to do...
Read More
Target flow meter Trouble Shooting
December 12, 2020
1) The flow meter display non-zero, while the flow velocity is zero. The following reasons and solution methods may be...
Read More
Target flow meter Characteristics
December 12, 2020
Measurement flow of liquid, gas, steam, ropy mediums, or ambulatory mediums in low, normal, or high-temperature conditions. Total quantity measurement...
Read More
Client calibration check list for different type of flow meters
December 12, 2020
https://drive.google.com/file/d/1BV3Udp1-9a7GFOeltCKI2L04-MGucMWR/view?usp=sharing
Read More
target flow meter calibration formula
December 12, 2020
When the flow medium flows through the measured tube, the pressure will force on the target because of the flow...
Read More
Target flowmeter display unit
December 12, 2020
Usually, the Target flowmeter display unit has the following options: flow unit m3 flow unit t flow unit L flow...
Read More
Magnetic flow meter calibration frequency
December 12, 2020
In many instances, yearly calibrations are not necessary. If the measurement requirements are high, there are more impurities and dirt...
Read More
Target flow meter before or after control valve
December 11, 2020
The flowmeter should generally be installed behind the valve, because the medium may appear two-phase after passing through the valve,...
Read More
Target flow meter testing procedure
December 11, 2020
Although the flow meter has been strictly tested before leaving the factory, because of changes in the environment, installation, running...
Read More
Checklist when selecting a mangetic flow meter
December 11, 2020
When choosing a magnetic flow meter, the following factors may take into consideration: 1 Fluid types 2 Accuracy 3 Density...
Read More
Target flow meter structure
December 11, 2020
Target Mode Flow meter consists of measure tube, pressure target, sensor part (include flow strength sensor, pressure sensor, and temperature...
Read More
target flow meter before or after pump
December 11, 2020
Target flow meter usually installed after the pump. As there should be no excessive pressure drop at the pump inlet...
Read More
target flow meter Zero set
December 11, 2020
Although the flow meter was set zero before leaving the factory, it may be offset because of the inevitable slight...
Read More
turbine flow meter k-factor
December 11, 2020
To find out the value of the "K factor" in a turbine flowmeter device, the manufacturer bypasses a defined volume...
Read More
Magnetic flow meter conductivity requirement
December 11, 2020
Electromagnetic flowmeter is used to measure the volume flow of conductive liquid medium with conductivity greater than 5μs/cm. To know...
Read More
turbine flow meter catalogue
December 11, 2020
The turbine flow meters are widely used in liquid and gas measurement. The gas turbine flow meters catalog: https://www2.slideshare.net/MichaelSun5/gas-turbine-flow-meter-239944663 ...
Read More