Thermal mass flowmeter measuring unit
March 7, 2021
The signal indicates that this field is adjustable Flow rate unit is selectable from g/min、g/s、 Kg/min、 Kg/h、 Nm3/h、Nm3/min、NL/h、NL/min、SCFM Cumulative flow...
Read More
Thermal mass flowmeter Upper Range Value of Common Gas
March 6, 2021
(Unit: Nm3 /h. The following table can be extended) Nominal Diameter (mm) Air Nitrogen（N2） Oxygen（O2） Hydrogen(H2) 15 65 65 32...
Read More
Thermal mass flowmeter Conversion Coefficient of Common Gas
March 6, 2021
According to different gas on-site, the calibration in the lab translates the flow rate of actual gas on-site into the...
Read More
Thermal mass flowmeter Trouble Shooting
March 5, 2021
Before any hardware repair, please ensure all the following points are correct as these affect the performance Check if the...
Read More
thermal mass flow meter upstream downstream
March 4, 2021
Pipe requirements If the Interference sources (i.e. bends, reduce, valves, T tubes, etc.) exist on the instrument intake pipe, measures...
Read More
thermal mass flow meter datasheet
March 3, 2021
The thermal mass flowmeter is a precision instrument that is produced by the latest technology and technology. Improper installation and...
Read More
ultrasonic level sensor output
March 2, 2021
Analog output signal: 0～20mA; 4～20mA load>300Ω; 0～5V; 0～10V Digital output: RS485 (Support Modbus) Wireless transmission: built-in GPRS wireless communication optional...
Read More
High frequency radar level meter Installation Requirements
March 1, 2021
Installation guide: Be installed in the diameter of 1/4 or 1/6. Note: The minimum distance from the tank wall should...
Read More
mass flow meter troubleshooting
February 28, 2021
Troubles Reasons Removing Value of dp is not steady Installation was incorrectness Install again follow 5.1 DP is sometimes big...
Read More
Thermal mass flow meter Installation
February 27, 2021
A stable flow field is the premise of the accurate measurement of the thermal instrument. Therefore, please note the following...
Read More
thermal mass flow meter
February 26, 2021
The thermal mass flowmeter is a precision instrument that is produced by the latest technology and technology. Improper installation and...
Read More
Z100M Mass flowmeter Setting zero
February 25, 2021
Setting zero is the key for the nicety measurement of flow meters. After a primary meter installed, this operation should...
Read More
mass flow meter Selecting Directions
February 24, 2021
Selecting correct specs of mass flow meters is the base for safe operation and accuracy measurement. Follow these selecting directions,...
Read More
Mass flowmeter Installation, Adjustment and Operation
February 23, 2021
Installation of meters The mass flow meter mostly is divided into two parts: a sensor (primary meter) and a transmitter...
Read More
Z100M mass flowmeter Specifications
February 22, 2021
The following table includes the line size, flow range, max tube pressure, zero stability, and velocity parameter. Specs Line Sizes...
Read More
mass flow meter parts
February 21, 2021
Z100M series mass flow meter sensor consists of a measurement tube, driving device, a position detector, support structure, the temperature...
Read More
How to correct the density of the target flowmeter in the measurement of crude oil
February 20, 2021
Foreword The measurement principle of the target flowmeter is: a target plate is set in the center of the circular...
Read More
mass flow meter data sheet
February 20, 2021
Coriolis mass flow meter is a new type of flow meter which is designed according to Micro Motion and Coriolis...
Read More
Target flow meter flow range table
February 19, 2021
Target flow meter standard water flow rate table Diameter (mm) Flow rate (m3/h) Range ratio of target to diameter Pressure...
Read More
Target flow meter normal range
February 18, 2021
When the target flowmeter was selected, first measure the medium flow range and caliber. If measuring general media, the full-scale...
Read More