admin_zero

In alkaline hydrogen production systems, separators play a crucial yet often overlooked role. Their primary function is to efficiently separate hydrogen gas from liquids (such as alkaline solution or water) at various stages, ensuring hydrogen purity, equipment safety, and system stability. The type of separator used depends on different operating conditions, and selecting the right

In high-risk industries such as petrochemicals, explosion-proof control rooms are critical barriers to ensure the safety of personnel and equipment. However, a seemingly basic question—how should instrumentation cables be introduced into these rooms—has sparked considerable debate in design practices. What do the regulations say about this? Beyond the controversial approaches, are there more standard and

In the industrial control sector, if PLCs are considered the limbs and DCS (Distributed Control Systems) the skeleton, then FCS (Fieldbus Control System) can be seen as the nervous system that connects it all. You may have rarely heard of FCS, but it quietly revolutionizes modern factories. Imagine a scenario where all intelligent devices in

Automatic dimming of the screen on servo level gauges is usually related to energy-saving settings, ambient light sensors, power supply issues, or hardware faults. Below are the specific causes and troubleshooting directions: Common Causes and Analysis: Energy-saving/Auto-sleep SettingsMost servo level gauges have an automatic energy-saving feature: if the screen is idle for a period (e.g.,

When wiring in non-explosive hazardous areas, the safety spacing between different types of cables varies depending on factors such as the type of cable and the method of installation. Below are some common safety spacing requirements: 1. Parallel Wiring of Power and Low Voltage Cables According to GB50311-2016 “Comprehensive Cabling System Engineering Design Specifications”, the

1. A Revolution in Industrial Communication In the realm of industrial automation, communication protocols are as essential as language itself. In 1979, Modicon (now Schneider Electric) introduced the Modbus protocol, designed to solve the problem of “incompatibility” between devices. At that time, each manufacturer used proprietary protocols, making it difficult for devices from different companies

In industries such as chemical production, paint manufacturing, and energy transportation, concepts like flash point, fire point, and auto-ignition temperature (AIT) are not abstract physical phenomena but critical temperature thresholds that define safety and risk levels. Understanding their differences and relationships is the foundation of fire and explosion safety design, storage, and transportation management. 1.

In fire safety design reviews for construction projects, even though the fuel storage room in a diesel generator room may not be large, it often faces scrutiny. Experienced designers often encounter a situation where an expert casually reviews the design and says, “Hey, no flammable gas detectors here?” followed by, “This poses a major safety