admin_zero

It can’t be used to measure gas, steam, and liquids containing a lot of gas. It can’t be used to measure liquid media with very low conductivity, such as petroleum products or organic solvents. Ordinary industrial electromagnetic flowmeters cannot be used to measure high-temperature media due to the limitation of the measuring tube lining material […]

Magnetic Flowmeter tailor-make for customer application. Accuracy +/- 0.5% Flow Rate 100 m3/Hr Pressure 10 Kg/Cm2 Service Liquid – Water Temp – Ambient Line Size – Suitable As Per Flow Rate 9 Existing Line Size Is 4” Application: Transfer From Tank To Tank End Connection: Fanged As Per # 150 Qty: 02 Nos.

After the nominal diameter of the vortex flowmeter is selected, the large pressure loss of the vortex flowmeter should be calculated based on the diameter of the large flow meter and the fluid density under working conditions. For gas and steam, the large pressure loss should be lower than the pressure loss value proposed by

The temperature and pressure compensation vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluid. Such as gas, liquid, vapor, and other media. It has small pressure loss, large measuring range-ability, and high accuracy. It is hardly affected by fluid density, pressure, temperature, viscosity, and other parameters when measuring volume flow

The output signal of the vortex flowmeter: a) Current signal: 4-20mA current value represents the instantaneous flow. b) Pulse output: square wave The output frequency of the pulse represents the instantaneous flow rate. c) Communication method: RS232/RS485/RS422 to transmit the current instantaneous flow of communication through the serial port.  On-site display: The on-site display is

The magnetic flow meter insertion type is an induction meter that measures the volume flow of conductive fluid. The magnetic flow meter insertion type is a new type of fluid flow meter developed on the basis of the pipeline electromagnetic flowmeter. On the basis of retaining the advantages of the pipeline electromagnetic flowmeter, it aims

Vortex flowmeter unit has m3 and Liter for options. The screen shows ① Flow Rate ② Total Flow ③ Keys

The price of the vortex flowmeter is decided by the pipe diameter and specifications, and also depends on the corrosiveness of the medium to select the material, the temperature and pressure of the working condition, the installation method is flange installation, integrated installation, or split installation, and plug-in installation and Clip-on installation. Therefore, with different

Introduction of output power supply of vortex flowmeter Vortex flowmeter output function: (1) Pulse output, the p-P value is determined by the power supply (2) 4~20mA two-wire current output (3) Unit volume pulse output and sensor raw pulse output (4) With RS485 communication interface Vortex flowmeter power supply: (1) DC5~ 24V (2) The standard 3V

The vortex flowmeter is a volume flowmeter that is researched and produced according to the Karman vortex principle to measure the volume flow of gas, steam, or liquid, the volume flow of the standard condition, or the mass flow. It is mainly used for flow measurement of industrial pipeline medium fluid, such as gas, liquid,