06 Each (Piece) Ø1/2” Flowmeter, for low flow *Flow Range: 0 – 25 Liter/Hr. Approx. *Fluid: Reagents (Example: Antifouling) (The fluid is light yellow in color, it is not transparent) *PH: 3 – 4 *Pressure approx.: 100PSI *Temperature: Ambient *To connect to stainless steel tubing and PVC Ø1/2″ The material is SS304.
Ø1/2” Metal tube Flowmeter for low flow Read More »
Customer requirements for: Line Size : 1″ , 1.5″ & 2″ Flow Media : Effluent Moc : SS With PTFE Lining Zero Instrument supply: Integrated electromagnetic flow meter, PTFE lining, 316L electrode, Carbon steel surface, 4-20mA output + RS485 communication, Flange connection, Pressure resistance 1.6 mpa, Temperature resistance-20 ~ 120 °C, Protection grade IP65 On
Case study of Electromagnetic Flow Meter test medium of effluent Read More »
The electromagnetic flow meter flow rate unit could set to the following states. L/h, L/m, L/s, m3/h, m3/m, m3/s, t/h, t/m, t/s, kg/h, kg/m, kg/s
Electromagnetic flow meter display unit Read More »
For the measurement accuracy requirements of the meter, consider whether the medium flow meets the flow range requirements of the flowmeter, whether the installation site meets the field installation requirements, and also consider what conditions and factors will affect the measurement of the flowmeter. To summarize 1. Pay attention to flowmeter selection. 2. Choose good
electromagnetic flow meter velocity form Read More »
1. Use only fluids that are compatible with the housing material and wetted components of your Electromagnetic Flow Meter. 2. When handling hazardous liquids, always exercise appropriate safety precautions. 3. When measuring flammable liquids, observe precautions against fire or explosion. 4. When working in hazardous environments, always exercise appropriate safety precautions. 5. Handle the sensor
General notice when received the electromgnetic flow meter Read More »
Steam and flow rate is 500kg/h, pressure 8 bar, 180-celsius degree, local indicator Flange DN65, C Type: Local Display; 24V DC Power; 4‐20mA Output; Max flow 500kg/h, Temp. 180-celsius degree, Pressure 8 bar,
DN65 vortex flow meter for steam application Read More »
The intelligent temperature transmitter is a high-performance product, compatible with more than 10 types of thermocouple and mal resistance signal transmission. Using a 24 Σ – delta sampling chip ensures high precision measurement; Anti-surge and anti-reverse connection design is adopted to avoid misinstallation and misoperation in engineering installation. Adopt enhanced software security design, including independent
intelligent temperature transmitter module Read More »
Product Performance 1.High accuracy, High stability, High anti-interference 2.Imported Silicon Chip, reference accuracy 0.2 percent of span 3.Four-Digit LED Display 4.Two-wire,4-20mA output, Hart 5.Flameproof housing structure, High anti-interference 6.Digital signal processing, Stable And Reliable 7.Suitable for large-scale data acquisition and automatic control systems 8.Simple structure, Convenient installation, and low production cost Application 1.Petroleum industry、Chemical industry、Power
Differential Pressure Transmitter Read More »
Digital Mass Flow Meter DMFM S.No. Parameter Specification 1 Principle of Operation Thermal mass flow meter 2 Measured Parameter Mass Flow-rate 3 Engineering Units SCCM 4 Process Gases Argon, helium, and Air (The same DMFM should be able to measure argon, Helium & airflow rate) 5 Ambient conditions 20°C – 40°C and up to 80%
Digital Mass Flow Meter DMFM for tendor supply Read More »
Type: ULTRASONIC FLOW METER (Clamp-on) Sensor: Sensor Process Water Nominal Diameter: 2” Pipe Material SS Flow 0-100 m3/hr. Pressure 10 bar max Temperature: Standard; max 120Deg C/248Deg F Design: Separate with field-mounted convertor (M16x1.5 CM) Signal 4-20 mA HART Rail; Cover Material SS 316 L; without cover Cable Length: 10 meters (Sensor to convertor) Calibration:
ULTRASONIC FLOW METER (Clamp-on) type Read More »
