admin_zero

When the target flowmeter was selected, first measure the medium flow range and caliber. If measuring general media, the full-scale flow rate of the target flowmeter can be selected within the range of 0.5-12m/s of the measured medium flow rate. The instrument diameter is not necessarily the same as the processing pipeline. It should be […]

When the target type flowmeter is measuring, the actual fluid will generate viscous friction when passing through the target, and a vortex will be generated behind the target, which will consume a part of the fluid and energy and cause pressure loss. The pressure loss is related to the caliber of the flowmeter, target diameter

The plug-in target flow meter is a new type of capacitive force induction flow plug-in target flowmeter developed on the basis of the traditional target flow meter and with the development of new sensors and microelectronics technology. It has an orifice plate Flowmeters such as vortex and vortex flowmeters have no moving parts, and at

The remote transmission type vortex flowmeter separates the sensor part from the display part. The remote compensation type vortex flowmeter is mainly composed of a vortex flow sensor, an intelligent flow totalizer, (platinum thermal resistance or pressure transmitter), a wall-mounted instrument box, etc. The display part can be placed at any position within a certain

Minimum flow problem The amplitude of the vortex signal is proportional to the square of the velocity of the measured medium and the density. In other words, when the detection sensitivity of the vortex flowmeter is constant, the working pressure of the fluid increases and the density increases, and the measured flow rate can be

Vortex flow meter hs code is 90261010. For different countries, it varies.

The working environment of the vortex flowmeter (1) There are many types of vortex flowmeters. The use ranges of different types and models of flowmeters are different, such as ambient temperature, medium temperature, measurement accuracy, and pipe diameter, etc. Please pay attention to their model and other technologies when installing parameters and take corresponding measures

The turbine flowmeter has high accuracy, a wide measurement range, and easy to install. But the measurement signal is easily affected due to the influence of various external factors, the interference is serious, and there is the danger of power failure, so the accuracy of conventional turbine flowmeters fluctuates and the error is large. And

The turbine flow meter with analog output has the feature of pressure loss is small, and the impeller has anti-corrosion function. It adopts advanced ultra-low power consumption single-chip microcomputer technology, which has strong functions, low power consumption and superior performance. Intelligent flow indicator with nonlinear precision compensation function. The accuracy of the correction formula is

The turbine flowmeter is widely used in many industrial applications, such as petroleum, the chemical industry, medicine, and so on. So it is necessary for us to have a new understanding of the turbine flowmeter. When the liquid turbine flowmeter is installed, the general strainer is installed at the position of 10DN at the front