admin_zero

The temperature and pressure compensation vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluid. Such as gas, liquid, vapor, and other media. It has small pressure loss, large measuring range-ability, and high accuracy. It is hardly affected by fluid density, pressure, temperature, viscosity, and other parameters when measuring volume flow […]

The output signal of the vortex flowmeter: a) Current signal: 4-20mA current value represents the instantaneous flow. b) Pulse output: square wave The output frequency of the pulse represents the instantaneous flow rate. c) Communication method: RS232/RS485/RS422 to transmit the current instantaneous flow of communication through the serial port.  On-site display: The on-site display is

The magnetic flow meter insertion type is an induction meter that measures the volume flow of conductive fluid. The magnetic flow meter insertion type is a new type of fluid flow meter developed on the basis of the pipeline electromagnetic flowmeter. On the basis of retaining the advantages of the pipeline electromagnetic flowmeter, it aims

Vortex flowmeter unit has m3 and Liter for options. The screen shows ① Flow Rate ② Total Flow ③ Keys

The price of the vortex flowmeter is decided by the pipe diameter and specifications, and also depends on the corrosiveness of the medium to select the material, the temperature and pressure of the working condition, the installation method is flange installation, integrated installation, or split installation, and plug-in installation and Clip-on installation. Therefore, with different

Introduction of output power supply of vortex flowmeter Vortex flowmeter output function: (1) Pulse output, the p-P value is determined by the power supply (2) 4~20mA two-wire current output (3) Unit volume pulse output and sensor raw pulse output (4) With RS485 communication interface Vortex flowmeter power supply: (1) DC5~ 24V (2) The standard 3V

The vortex flowmeter is a volume flowmeter that is researched and produced according to the Karman vortex principle to measure the volume flow of gas, steam, or liquid, the volume flow of the standard condition, or the mass flow. It is mainly used for flow measurement of industrial pipeline medium fluid, such as gas, liquid,

Several factors influence the magnetic flow meter’s maximum velocity. The diameter of the flowmeter is determined by the flow rate, not necessarily by the pipe diameter. In the process industry, the flow rate of liquids with low viscosity such as water is the economical rate of 1.5 to 3m/s. In such pipelines, the sensor caliber

Electromagnetic flowmeter ambient temperature: 20℃ to +55℃. The working temperature of the intelligent electromagnetic flowmeter depends on the lining material used, for example, the polytetrafluoroethylene lining is 120℃ and the PFA lining is 180℃. If special treatment is done, it may exceed the above range. Wear-and corrosion-resistant electromagnetic flowmeter, the transmitter allows measured medium temperature

Flow rate refers to the amount of fluid passing a certain cross-sectional area every minute unit. If you express this quantity by the fluid volume, it’s referred to as instantaneous mass flow or volume flow. Instantaneous mass flow is when it is expressed by mass, known as mass flow. Flow measurement is a collective word