admin_zero

Typical Application The intelligent electromagnetic flowmeter consists of two parts: sensor and converter. Based on Faraday’s law of magnetic induction, it’s a speed meter to measure the volume flow of conductive liquid. In addition, to measure the volume flow of general conductive liquids, it can also be used to measure the volume flow rate of […]

 Measurements are not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity. There is no obstruction component in the measuring tube, no pressure loss reduced the requirements of the straight pipeline. It has a unique adaptability to slurry measurement. It has good corrosion resistance and wears resistance when choosing reasonable electrodes and lining

Generally, the fluid measured by the electromagnetic flowmeter will contain some bubbles, and if these bubbles are relatively evenly distributed, they will not affect the measurement, but once the bubbles become larger, the output signal of the flowmeter will be a larger or smaller influence.   First of all, from the installation to meet the

The magnetic flowmeter price varies according to the difference of flange size, flange standard, body material, sensor lining, accuracy, output, electrode, etc. The EXW without VAT or the shipping charges will influence the price. It’s better for you to know the application and working environment. Contact the supplier to get the details’ quotation.

1. The working theory is different Electromagnetic flowmeter working theory The electromagnetic flowmeter is a flowmeter that performs flow measurements according to Faraday’s law of electromagnetic induction. The advantage of the electromagnetic flowmeter is that the pressure loss is extremely small and the measurable flow range is large. The ratio of the maximum flow rate

Installation on field Mounting position Pipes must be fully filled with liquids. It is essential that pipes remain fully filled at all times, otherwise, flow rate indications may be affected, and measurement errors may be caused. Avoid air bubbles. If air bubbles enter a measurement pipe, flow rate indications may be affected and measurement errors

Two-wire PLUS Loop Powered Electromagnetic Flow Meter Ultra-low EMI switching power supply suits a wide range of power supply voltage and has good EMI resistance. It adopts 16-bit embedded microprocessor, which is fast, and high precision, uses low-frequency rectangular waves to exit, and programmable excitation frequency, which improves the stability of flow measurement and low

There are big differences in the performance of general-purpose electromagnetic flowmeter on the market. Some have high accuracy and many functions, and some have low accuracy and simple functions. The typical accuracy of a magnetic flowmeter is 0.5% of the measured value from 0.3 ft per sec to 33 ft per sec (0.1 to 10

Function The grounding ring is in direct contact with the medium through the grounding electrode and then grounded to the instrument flange through the grounding ring to achieve equipotential with the ground to eliminate interference. Grounding ring uses It is often not suitable to add a grounding ring on some occasions. For example, when measuring