Application of tuning fork level switch in edible oil level measurement - Just Measure it

Application of tuning fork level switch in edible oil level measurement

The application of tuning fork level switch in edible oil level measurement is common and has its unique advantages.

The working principle of the tuning fork liquid level switch is to drive vibration through a piezoelectric device. When the tuning fork is immersed in liquid, its vibration frequency will change. 

This change is detected by the electronic circuit and converted into a switching signal.

Therefore, when the cooking oil level rises or falls, the tuning fork level switch can accurately detect and send a corresponding signal.

The tuning fork level switch has the following advantages in edible oil level measurement:

 

1. High-precision measurement: The vibration frequency change of the tuning fork level switch is very sensitive to changes in liquid level, so high-precision edible oil level measurement can be achieved.

 

2. Good stability: The tuning fork level switch is not easily affected by impurities, bubbles or turbulence in edible oil, thus ensuring the stability of measurement.

 

3. High durability: Since the tuning fork level switch has no moving parts, it has low maintenance costs and long service life.

 

4. Wide range of application: The tuning fork level switch is not only suitable for edible oil, but also can be used for a variety of other liquid media, with wide applicability.

However, there are some things you need to pay attention to when installing and using a tuning fork level switch for cooking oil level measurement:

 

1. Correct installation: In order for the tuning fork level switch to accurately measure the cooking oil level, it is necessary to ensure that the tuning fork is installed in the correct position and avoid being installed in an area where the liquid flows too fast or a large number of bubbles are generated.

 

2. Regular maintenance: Although the maintenance cost of the tuning fork level switch is low, its working status still needs to be checked regularly to ensure its normal operation.

 

3. Calibration and adjustment: During use, the tuning fork liquid level switch may need to be calibrated and adjusted according to actual needs to ensure its measurement accuracy.

In short, the tuning fork level switch has wide application prospects in edible oil level measurement. Its high accuracy, stability and durability make it an ideal liquid level measurement tool.

However, it is also necessary to pay attention to issues such as correct installation, regular maintenance and calibration adjustments during use to ensure the accuracy and reliability of its measurement results.

Share This Story, Choose Your Platform!

Contact Us

    Please prove you are human by selecting the plane.