Mine ultrasonic level gauge is an instrument used to measure the level or height of liquid or solid materials. It achieves measurement by sending and receiving ultrasonic signals. The following are the basic usage methods of mining ultrasonic liquid level meter:
1. Install the liquid level meter: First, select an appropriate location to install the mining ultrasonic liquid level meter according to actual needs and equipment instructions. Ensure that the installation location avoids sources of interference or obstacles and is as vertical as possible to liquids or materials.
2. Connect the power and signal lines: Connect the power and signal lines of the liquid level gauge to the corresponding power supply and control system. Make sure the power cord and signal cable are connected correctly and reliably.
3. Set parameters: Use the buttons or electronic devices on the liquid level gauge to set the relevant parameters of the liquid level gauge, such as measurement range, output signal type, response time, etc. Adjust parameters according to specific circumstances.
4. Start the liquid level gauge: Turn on the power switch of the liquid level gauge and ensure that the equipment starts and operates normally. Monitor the display or indicator light on the level gauge to ensure the equipment is in proper working order.
5. Calibrate the liquid level gauge: If necessary, perform calibration of the liquid level gauge. Calibration steps usually include setting the reference point, zero point, full scale, etc. Follow the correct steps for calibration according to the equipment instructions and operating manual.
6. Monitor the measurement results: Let the liquid level meter start measuring and monitor the measurement results of the liquid level meter. These results can be transmitted to the control system via displays, indicator lights or output interfaces on the device.
7. Regular maintenance: Regularly check the working status of the liquid level gauge and the cleanliness of the sensor. Perform maintenance and upkeep as needed to ensure proper operation and accuracy of equipment.
It should be noted that the operating methods and parameter settings of different mining ultrasonic level meters may be different, so be sure to refer to the equipment instructions and operating manual before use and follow the correct steps to operate and set up.
In addition, maintenance and upkeep are also key to ensuring equipment performance and measurement accuracy and should be performed regularly.