Radar level meters are advanced measuring instruments for solid materials, process vessels, or strong dust prone to crystallization and condensation. It has the advantages of low maintenance, high performance, high accuracy, high reliability, and long service life. It can be adapted to harsh production environments such as high temperature, high pressure, and steam.
With its non-contact measurement method, the radar level meter has gradually replaced contact level measurement technology such as the heavy hammer level meter.
Because they are not in contact with the measured medium, radar level meters are virtually maintenance-free, free from breakage, hanging material, and other phenomena, have no replacement of accessories, have a long life, and are simple to install and calibrate, and are not affected by gas composition, dust and temperature changes in the silo.
Radar level meters are used in a wide range of applications. Radar level meters send microwaves very fast, basically at the speed of light, and can be measured accurately within a very short period of time. We must pay attention to the following basic installation requirements when installing the radar level meter.
It is best to install the radar level meter at the specified location in the instructions and to keep the radar meter at a certain distance from the tank mouth so that it is more convenient to use and the accuracy of the measurement will be more accurate. Be careful not to install it on top of the inlet, but to keep the distance between the instrument and the tank wall to avoid affecting the use of the radar level meter.
Radar level meter measurement is calculated from a certain point, generally, if nothing special happens, this starting point is the concave place at the bottom of the tank, if people do not pay attention and measure at a position lower than this concave point, then this measurement accuracy will be inaccurate and cannot be measured properly, which is not obtainable.
Therefore, the radar level meter in addition to the installation meets the requirements, in the measurement of the use of the time to follow the rules of the manual, so the use of the radar level meter plays the maximum measurement advantages.