The radar level meter uses microwave pulse measurement and can operate normally in the industrial frequency band with low beam energy.
It can be installed in a variety of metallic and non-metallic vessels or pipes for non-contact continuous level measurement of liquids, slurries and granular materials.
It is suitable for applications where dust, temperature and pressure vary considerably and where inert gases and vapours are present. At present, radar level meter is widely used in many industries, such as metallurgical industry, coal industry, cement industry, petrochemical industry, etc.
These industries are subdivided into many specific occasions, the following subdivision summary for you.
1. Metallurgical industry
The main applications in the metallurgical industry are, iron ore, limestone raw material and raw coal silos in steel plants; charcoal powder, aluminium ore and coal powder in aluminium plants, etc.
2. Coal industry
The main applications in the coal industry are, raw coal, fine coal, slag, pulverized coal, and coal containing effluent from coal washing plants.
3. Cement industry
The main applications in the cement industry are slag storage silos, raw material homogenization silos, clinker silos, cement silos, etc.
4. Power industry
The main applications in the power industry are desulphurization, lubricating oil, slurry, raw coal silos, fuel silos, etc.
5. Water Industry
The main applications in the water industry are lakes, rivers, reservoirs, open channels, wetlands, shallows, tides, groundwater networks, ditches containing large amounts of floating and sediment, sites producing large amounts of watercress, and areas prone to flash floods.
6. Petrochemical industry
The main applications in the petrochemical industry are, crude oil, hydrogen tincture, dirty oil and sludge in oil extraction plants, sink tanks, sewage tanks and drilling mud tanks in oil fields, liquefied natural gas and condensate in liquefied gas stations, petrol, diesel and tar in oil storage depots and biodiesel plants, molten urea and ammonia in compound fertilizer plants, various chemical products, high temperature and high pressure highly corrosive media and toxic products in chemical plants, etc.
Summery
Radar level meter is very widely used, in addition to the above, it can also be applied in many occasions. In addition, if your working conditions can be measured using a radar level meter, then it will inevitably involve the selection of the level meter, we recommend that you analyse the specific problems in order to select the most suitable instrument, and ultimately achieve the best results.