1. The first application field is flowing measurement from Limestone slurry tank common header to Absorber 1.2&3
Zero Instrument equipment supply.
2/4 wire Microprocessor-based Integral type Magnetic
Flowmeter, Electrode Material: SS316/Tantalum, Liner
Material: PFA, Process connection: Flange, Accuracy: 0.5% of
span, Output: 4-20mAHART, No. of Digit Display: 4 line LCD
Display(min), Electrical Connection: 1/2″ NPT(M), Housing
Protection: IP 65, Tube Size: Vendor to specify based on the
sizing calculation, Diagnostic: Lining erosion, electrode,
Recommended velocity: Vendor to specify, Straight length
requirement: Vendor to specify. Accessories: CS Counter
Flange, Gasket, Flow: 62 m3/hr, Pressure: 3.5 bar(g),
Temp: 35 deg C,Fluid Medium: limestone slurry. Line
Size: 100NB. Line MOC: ERW Pipe.Process connection: 4″ 150 lb
Flange, Inst. Cali. Range: 0-100 m3/hr
2.Flow measurement of process water to oxidation system
2 wire Microprocessor-based Integral type Magnetic
Flowmeter, Electrode Material: SS316L, Liner Material:
PTFE, Process connection: Wafer, Flow Tube MOC:
SS304,Accuracy: 0.5% of span, Output: 4-20mAHART, No. of
Digit Display: 4 line LCD Display(min), Electrical Connection:
1/2″ NPT(M), Housing Protection: IP 65, Tube Size: Vendor to
specify based on the sizing calculation, Diagnostic: Lining
erosion, electrode, Recommended velocity: Vendor to specify,
Straight length requirement: Line Size: 25NB, Flow: 5 m3/hr,
Pressure: 2 bar(g), Temp: 40 deg C, Pipe MOC: Carbon steel,Process
connection: 1″150lb Flange.Inst. Range: 0-15 m3/hr
3.Flow measurement at the make up header of Process water to Emergency quench water tank for Absorber 1, 2 &3
2 wire Microprocessor-based Integral type Magnetic
Flowmeter, Electrode Material: SS316, Liner Material: PTFE,
Process connection: Wafer, Accuracy: 0.5% of span, Output:
4-20mAHART, No. of Digit Display: 4 line LCD Display(min),
Electrical Connection: 1/2″ NPT(M), Housing Protection: IP
65, Tube Size: Vendor to specify based on the sizing
the calculation, Diagnostic: Lining erosion, electrode,
Recommended velocity: Vendor to specify, Straight length
requirement: Flow: 50 m3/hr, Pressure:5bar(g),Temp: 40 deg C,
Fluid Medium: Water. Line Size: 50 NB.Pipe Moc: Carbon steel,
Pipe Moc: Carbon steel,Process connection: 2″ Flange.Inst. Cali. Range: 0-50 m3/hr